Alterlab Scvelo

scVelo — RNA Velocity Analysis

Overview

scVelo is the leading Python package for RNA velocity analysis in single-cell RNA-seq data. It infers cell state transitions by modeling the kinetics of mRNA splicing — using the ratio of unspliced (pre-mRNA) to spliced (mature mRNA) abundances to determine whether a gene is being upregulated or downregulated in each cell. This allows reconstruction of developmental trajectories and identification of cell fate decisions without requiring time-course data.

Installation: uv pip install "scvelo==0.3.4" — 0.3.4 (uploaded 2026-02-24) is the current release and the package is now only minimally maintained: its published release notes stop at 0.2.5, upstream CI still targets Python 3.9/3.10, and its dependency declarations (numpy>=1.17, scanpy>=1.5, anndata>=0.7.5) have no upper bounds, so pip will happily build an environment scVelo was never tested against.

Practical consequence: install it in its own environment with a pinned NumPy rather than into a current scverse stack. If you hit dtype or scalar-assignment errors under NumPy 2 — most often in mode="stochastic", whose second-moment regression assigns a one-element least-squares result to a scalar — pin numpy<2 (e.g. numpy==1.26.4) and re-run. Check velocity results for silent breakage rather than assuming they are fine: compare the stochastic and dynamical modes, and confirm the streamlines agree with known biology.

Key resources:

• Documentation: https://scvelo.readthedocs.io/
• GitHub: https://github.com/theislab/scvelo
• Paper: Bergen et al. (2020) Nature Biotechnology. PMID: 32747759

When to Use This Skill

Use scVelo when:

• Trajectory inference from snapshot data: Determine which direction cells are differentiating
• Cell fate prediction: Identify progenitor cells and their downstream fates
• Driver gene identification: Find genes whose dynamics best explain observed trajectories
• Developmental biology: Model hematopoiesis, neurogenesis, epithelial-to-mesenchymal transitions
• Latent time estimation: Order cells along a pseudotime derived from splicing dynamics
• Complement to Scanpy: Add directional information to UMAP embeddings

Does NOT Trigger

Prerequisites

scVelo requires count matrices for both unspliced and spliced RNA. These are generated by:

1. STARsolo or kallisto|bustools with lamanno mode
2. velocyto CLI: velocyto run10x / velocyto run
3. alevin-fry / simpleaf with spliced/unspliced output

Data is stored in an AnnData object with layers["spliced"] and layers["unspliced"].

Standard RNA Velocity Workflow

1. Setup and Data Loading

pythonCopy code
import scvelo as scv
import scanpy as sc
import numpy as np
import matplotlib.pyplot as plt

# Configure settings
scv.settings.verbosity = 3       # Show computation steps
scv.settings.presenter_view = True
scv.settings.set_figure_params('scvelo')

# Load data (AnnData with spliced/unspliced layers)
# Option A: Load from loom (velocyto output)
adata = scv.read("cellranger_output.loom", cache=True)

# Option B: Merge velocyto loom with Scanpy-processed AnnData
adata_processed = sc.read_h5ad("processed.h5ad")  # Has UMAP, clusters
adata_velocity = scv.read("velocyto.loom")
adata = scv.utils.merge(adata_processed, adata_velocity)

# Verify layers
print(adata)
# obs × var: N × G
# layers: 'spliced', 'unspliced' (required)
# obsm['X_umap'] (required for visualization)

2. Preprocessing

pythonCopy code
# Filter and normalize (follows Scanpy conventions)
scv.pp.filter_and_normalize(
    adata,
    min_shared_counts=20,   # Minimum counts in spliced+unspliced
    n_top_genes=2000        # Top highly variable genes
)

# Compute first and second order moments (means and variances).
# scv.pp.moments runs PCA + a kNN graph internally if they're absent, so
# you do NOT need a separate sc.pp.neighbors call here. Calling moments with
# n_pcs/n_neighbors and ALSO running sc.pp.neighbors first just recomputes the
# graph with possibly mismatched params — let moments own it on a fresh object.
scv.pp.moments(
    adata,
    n_pcs=30,
    n_neighbors=30
)

3. Velocity Estimation — Stochastic Model

The stochastic model is fast and suitable for exploratory analysis:

pythonCopy code
# Stochastic velocity (faster, less accurate)
scv.tl.velocity(adata, mode='stochastic')
scv.tl.velocity_graph(adata)

# Visualize
scv.pl.velocity_embedding_stream(
    adata,
    basis='umap',
    color='leiden',
    title="RNA Velocity (Stochastic)"
)

4. Velocity Estimation — Dynamical Model (Recommended)

The dynamical model fits the full splicing kinetics and is more accurate:

pythonCopy code
# Recover dynamics (computationally intensive; ~10-30 min for 10K cells)
scv.tl.recover_dynamics(adata, n_jobs=4)

# Compute velocity from dynamical model
scv.tl.velocity(adata, mode='dynamical')
scv.tl.velocity_graph(adata)

5. Latent Time

The dynamical model enables computation of a shared latent time (pseudotime):

pythonCopy code
# Compute latent time
scv.tl.latent_time(adata)

# Visualize latent time on UMAP
scv.pl.scatter(
    adata,
    color='latent_time',
    color_map='gnuplot',
    size=80,
    title='Latent time'
)

# Identify top genes ordered by latent time
top_genes = adata.var['fit_likelihood'].sort_values(ascending=False).index[:300]
scv.pl.heatmap(
    adata,
    var_names=top_genes,
    sortby='latent_time',
    col_color='leiden',
    n_convolve=100
)

6. Driver Gene Analysis

pythonCopy code
# Identify genes with highest velocity fit
scv.tl.rank_velocity_genes(adata, groupby='leiden', min_corr=0.3)
df = scv.DataFrame(adata.uns['rank_velocity_genes']['names'])
print(df.head(10))

# Speed and coherence
scv.tl.velocity_confidence(adata)
scv.pl.scatter(
    adata,
    c=['velocity_length', 'velocity_confidence'],
    cmap='coolwarm',
    perc=[5, 95]
)

# Phase portraits for specific genes
scv.pl.velocity(adata, ['Cpe', 'Gnao1', 'Ins2'],
               ncols=3, figsize=(16, 4))

7. Velocity Arrows and Pseudotime

pythonCopy code
# Arrow plot on UMAP
scv.pl.velocity_embedding(
    adata,
    arrow_length=3,
    arrow_size=2,
    color='leiden',
    basis='umap'
)

# Stream plot (cleaner visualization)
scv.pl.velocity_embedding_stream(
    adata,
    basis='umap',
    color='leiden',
    smooth=0.8,
    min_mass=4
)

# Velocity pseudotime (alternative to latent time)
scv.tl.velocity_pseudotime(adata)
scv.pl.scatter(adata, color='velocity_pseudotime', cmap='gnuplot')

8. PAGA Trajectory Graph

pythonCopy code
# PAGA graph with velocity-informed transitions
scv.tl.paga(adata, groups='leiden')
df = scv.get_df(adata, 'paga/transitions_confidence', precision=2).T
df.style.background_gradient(cmap='Blues').format('{:.2g}')

# Plot PAGA with velocity
scv.pl.paga(
    adata,
    basis='umap',
    size=50,
    alpha=0.1,
    min_edge_width=2,
    node_size_scale=1.5
)

Complete Workflow Script

pythonCopy code
import scvelo as scv
import scanpy as sc

def run_rna_velocity(adata, n_top_genes=2000, mode='dynamical', n_jobs=4):
    """
    Complete RNA velocity workflow.

    Args:
        adata: AnnData with 'spliced' and 'unspliced' layers, UMAP in obsm
        n_top_genes: Number of top HVGs for velocity
        mode: 'stochastic' (fast) or 'dynamical' (accurate)
        n_jobs: Parallel jobs for dynamical model

    Returns:
        Processed AnnData with velocity information
    """
    scv.settings.verbosity = 2

    # 1. Preprocessing
    scv.pp.filter_and_normalize(adata, min_shared_counts=20, n_top_genes=n_top_genes)

    if 'neighbors' not in adata.uns:
        sc.pp.neighbors(adata, n_neighbors=30)

    scv.pp.moments(adata, n_pcs=30, n_neighbors=30)

    # 2. Velocity estimation
    if mode == 'dynamical':
        scv.tl.recover_dynamics(adata, n_jobs=n_jobs)

    scv.tl.velocity(adata, mode=mode)
    scv.tl.velocity_graph(adata)

    # 3. Downstream analyses
    if mode == 'dynamical':
        scv.tl.latent_time(adata)
        scv.tl.rank_velocity_genes(adata, groupby='leiden', min_corr=0.3)

    scv.tl.velocity_confidence(adata)
    scv.tl.velocity_pseudotime(adata)

    return adata

Key Output Fields in AnnData

After running the workflow, the following fields are added:

Velocity Models Comparison

Best Practices

• Start with stochastic mode for exploration; switch to dynamical for final analysis
• Need good coverage of unspliced reads: Short reads (< 100 bp) may miss intron coverage
• Minimum 2,000 cells: RNA velocity is noisy with fewer cells
• Velocity should be coherent: Arrows should follow known biology; randomness indicates issues
• k-NN bandwidth matters: Too few neighbors → noisy velocity; too many → oversmoothed
• Sanity check: Root cells (progenitors) should have high unspliced/spliced ratios for marker genes
• Dynamical model requires distinct kinetic states: Works best for clear differentiation processes

Troubleshooting

Additional Resources

• scVelo documentation: https://scvelo.readthedocs.io/
• Tutorial notebooks: https://scvelo.readthedocs.io/en/stable/VelocityBasics.html
• GitHub: https://github.com/theislab/scvelo
• Paper: Bergen V et al. (2020) Nature Biotechnology. PMID: 32747759
• velocyto (preprocessing): http://velocyto.org/
• CellRank 2 (fate prediction; consumes a velocity kernel but also works without RNA velocity, via pseudotime / real-time / metabolic-labelling kernels — the actively maintained route for fate probabilities): https://cellrank.readthedocs.io/
• dynamo (metabolic labeling alternative): https://dynamo-release.readthedocs.io/