Term Cli

Terminal Session Control

You can now run any interactive application using term-cli — dev servers, debuggers, REPLs, databases, SSH sessions, editors, and TUIs — without blocking.

Debuggers encouraged: Prefer interactive debuggers (pdb, gdb) via term-cli whenever appropriate for the task. This complements (and is often superior to) print-based debugging: set breakpoints, step, inspect state, then capture to reason.

Think concurrently: term-cli runs long tasks in the background. Start tests/builds/servers in one session while you write docs or investigate code in parallel. Once all other tasks are done, check back with wait/capture. Tip: occasionally run date +"%H:%M:%S" in a session to see when things happened, estimate future execution and to calibrate your own loop speed.

Self-documenting: Run term-cli --help or term-cli <command> --help for complete usage details.

Quick Start

bashCopy code
term-cli start --session dev && term-cli run --session dev "make test"
# ... do other work ...
term-cli wait --session dev && term-cli capture --session dev
term-cli kill --session dev

Commands

Session Management

bashCopy code
term-cli start --session NAME --cwd /path
term-cli kill --session NAME
term-cli list
term-cli status --session NAME

Running Commands

bashCopy code
term-cli run --session NAME "make test" --wait --timeout 60   # default: 10s

Sending Input

bashCopy code
term-cli send-text --session NAME ":wq" --enter && term-cli wait --session NAME
term-cli send-key --session NAME C-c
term-cli send-stdin --session NAME < file.txt
term-cli send-mouse --session NAME --text "Item B"
term-cli send-mouse --session NAME --text "Item B" --scroll-down 3

Keys: C-c C-d C-z C-u C-l (ctrl), Enter Escape Tab Space BSpace, Up Down Left Right, Home End PPage NPage, F1-F12

send-mouse works only in alternate screen mode (active TUI). Prefer --text targets over coordinates when possible.

Capturing Output

bashCopy code
# Visible screen only (default: physical rows, trimmed, no ANSI)
# Prefer this — it's almost always enough
term-cli capture --session NAME

# Last N physical rows from the bottom of the visible screen
term-cli capture --session NAME --tail 10

# Last N logical lines from scrollback+visible history (joins wrapped lines)
# Use only when you need output that scrolled off-screen
# In alternate screen (TUIs / nested tmux), this is blocked by default
term-cli capture --session NAME --scrollback 20

# Override alternate-screen protection (may return stale/misleading history)
term-cli capture --session NAME --scrollback 20 --force

# Include ANSI escape codes (colors) — works with any mode
term-cli capture --session NAME --scrollback 10 --raw

# Annotated capture — pane metadata + highlight annotations
# Shows screen mode, bell, cursor position, and highlighted TUI elements
# Use this when operating TUIs where you need to identify selected items
term-cli capture --session NAME --annotate

# Default capture auto-enables annotations for active alternate-screen TUIs.
# Force plain output when needed:
term-cli capture --session NAME --no-annotate

# Optional line numbers (1-based) for visible-screen captures (not scrollback)
term-cli capture --session NAME --annotate --line-numbers

When to use --annotate vs --raw vs plain capture:

• Plain capture — default for shells, REPLs, command output. Fast, clean text.
• --annotate — for TUIs (menus, file managers, settings panels) where you need to know what's happening. Returns visible content plus an Annotations: section with screen mode (normal/alternate), bell alerts, cursor position (Cursor: row,col, 1-based), optional mouse mode (Mouse: ... when enabled), and highlighted rows (1-based). Bell alerts are one-shot: shown once then cleared.
• Auto behavior — plain capture auto-enables annotations only when an active alternate-screen TUI is detected; idle shell prompts stay plain. Use --annotate / --no-annotate to override.
• --raw — when you need exact ANSI escape codes (e.g., parsing color semantics yourself). Higher token cost.

Waiting

Prefer wait — it detects shell prompts ($, %, #), REPL prompts (>>>, (Pdb), >), and is fastest.

bashCopy code
term-cli wait --session NAME

Use wait-idle for TUIs (vim, htop, less) that don't have a detectable prompt — waits for screen to settle:

bashCopy code
term-cli wait-idle --session NAME                                      # defaults: 2s idle, 10s timeout

Use wait-for sparingly — waits for pattern in screen output:

bashCopy code
term-cli wait-for --session NAME "error" "success" --ignore-case --print-match
term-cli wait-for --session NAME "error" --print-match-context 3             # match + 3 lines above/below

⚠️ Warning: wait-for matches the entire screen including your echoed command:

bashCopy code
# WRONG — pattern appears in echoed command, triggers immediately - WRONG
term-cli send-text --session NAME "./build.sh && echo DONE" --enter
term-cli wait-for --session NAME "DONE"
# ↑ Problem: The screen now shows "./build.sh && echo DONE" so "DONE" matches instantly

# RIGHT — wait for program output (not your own marker)
term-cli run --session NAME "npm run dev"
term-cli wait-for --session NAME "Listening on port"

# RIGHT — assemble pattern during print so it doesn't appear in command
term-cli send-text --session NAME "./build.sh && printf 'DON' && printf 'E\n'" --enter
term-cli wait-for --session NAME "DONE"

# BEST — use wait or run --wait when possible
term-cli run --session NAME "./build.sh" --wait

Human Assistance

When you need human help (passwords, CAPTCHAs, manual intervention):

bashCopy code
term-cli request --session NAME --message "Please enter SSH password"
term-cli request-wait --session NAME                                   # default timeout: 300s (5 min)
term-cli request-status --session NAME
term-cli request-cancel --session NAME

How it works: Your human runs term-assist list to see pending requests, then term-assist attach --session NAME to join. A status bar shows your message. When finished, they press Ctrl+B Enter to complete — they can optionally type a response message for you. request-wait then returns and you continue.

If they detach with Ctrl+B d while a request is still pending, request-wait fails with exit code 4.

File Transfer (over SSH / any shell)

Transfer files in-band through the terminal session — works over SSH, in containers, or any shell. No scp/sftp needed.

bashCopy code
# Upload a local file to the remote session
term-cli upload --session NAME local_file.txt remote_file.txt

# Download a remote file to local
term-cli download --session NAME remote_file.txt local_file.txt

# Overwrite existing files (both commands refuse by default)
term-cli upload --session NAME file.txt file.txt --force --timeout 30

# Pipe support: upload from stdin (REMOTE_PATH required)
cat config.json | term-cli upload --session NAME - /remote/config.json

# Pipe support: download to stdout (status message goes to stderr)
term-cli download --session NAME /remote/data.csv - | jq .

Key behaviors:

• Hash verification — SHA-256 integrity check
• Gzip compression — transfers are always gzip-compressed
• Pipe support — use -, status/verbose output goes to stderr
• Requires Python 3 on the remote — transfer deploys a Python helper; fails if python3 is not available
• Prompt required — session must be at a clean shell prompt; transfers fail (exit 2) if a command is running, a TUI is active, or there is partial input on the line
• Overwrite protection — refuses without --force
• Fast Uploads
• Optimized Downloads — starts with pipe-pane only in normal screen mode; in alternate screen mode (nested tmux/TUI), it goes directly to chunked mode for reliability.
• Default timeout: 120s — set with --timeout

Other Commands

bashCopy code
term-cli resize --session NAME --cols 120 --rows 40
term-cli scroll --session NAME -50
term-cli pipe-log --session NAME /tmp/out.log
term-cli unpipe --session NAME

Example: Concurrency (Run long tasks while you work)

bashCopy code
term-cli start --session tests && term-cli run --session tests 'date +"%H:%M:%S"; pytest -q'
# ... do other work in parallel ...
term-cli wait --session tests --timeout 1800; term-cli capture --session tests
term-cli kill --session tests

Example: Dev Server

bashCopy code
term-cli start --session server && term-cli run --session server "npm run dev"
term-cli wait-idle --session server --timeout 15 && term-cli capture --session server
# ... later ...
term-cli send-key --session server C-c && term-cli wait --session server
term-cli kill --session server

Example: Python Debugger (pdb)

bashCopy code
term-cli start --session debug && term-cli run --session debug "python3 -m pdb script.py" && term-cli wait --session debug
term-cli send-text -s debug "b 42" --enter && term-cli wait -s debug      # breakpoint
term-cli send-text -s debug "c" --enter && term-cli wait -s debug         # continue
term-cli send-text -s debug "p some_var" --enter && term-cli wait -s debug && term-cli capture -s debug --tail 5
term-cli send-text -s debug "q" --enter; term-cli wait -s debug           # quit (may need 'y' to confirm)
term-cli kill --session debug

Example: SSH with Password (Human Helps)

bashCopy code
term-cli start --session remote && term-cli run --session remote "ssh user@host"
term-cli wait --session remote && term-cli capture --session remote
# If password prompt shown, request human help; if shell prompt, key auth succeeded
term-cli request --session remote --message "Please enter SSH password"
term-cli request-wait --session remote && term-cli capture --session remote

Example: File Transfer over SSH

bashCopy code
# Assumes passwordless login
term-cli start --session remote && term-cli run --session remote "ssh user@host" --wait
# Upload a config file
term-cli upload --session remote ./nginx.conf /etc/nginx/nginx.conf
# Download a log file
term-cli download --session remote /var/log/app.log ./app.log

Tips

• Defaults are sane. Plain capture (visible screen), wait (10s timeout), and start (80x24) work for most cases. Use --tail to focus on just the last few rows. Only add --timeout or --scrollback when the default isn't enough.
• Use long-form flags. --session, --timeout, --scrollback over -s, -t, -n. Short forms save almost no tokens and hurt readability.
• Chain commands: Fewer tool calls = less overhead, lower token usage, faster wall clock time. Use && for dependent operations (send-text --enter && wait), ; to always run the next command (wait --timeout 5; capture — see output even on timeout).
• Remember: you can run interactive apps through term-cli (debuggers, TUIs, SSH, installers).
• Lost context after memory compaction? Plain capture first (visible screen is usually enough). Use --scrollback 30 if relevant output scrolled off in normal screen mode. In alternate screen mode, prefer --tail/--annotate; use --force only when you explicitly accept potentially stale history.
• Prefer debuggers (pdb/gdb) via term-cli for bug analysis; step + inspect beats print-debugging for many issues.
• Think concurrently: start long tasks in one session and keep working; check progress with status, wait, and capture.
• Use --help on any command for details: term-cli run --help
• Default timeout is 10s for most wait commands — increase for builds, tests, or slow operations
• run --wait already waits for prompt — don't add another wait after it
• Capture before sending keys to verify screen state
• Unsure if a TUI is running? term-cli status --session NAME shows Screen: alternate when a full-screen app (vim, htop, less) is active. Use wait-idle for alternate screen, wait for normal.
• Navigating TUIs? Use capture --annotate to see screen mode, bell alerts, cursor position (Cursor: row,col, 1-based), and which items are highlighted. Plain capture loses all styling, and --raw costs many tokens.
• Default request-wait timeout is 5 minutes — usually no need to override
• Locked sessions (exit code 5): agent can only capture, status, wait-*, request*, list, scroll, pipe-log, unpipe. Commands run, send-*, resize, kill, upload, download are blocked

Exit Codes

Feedback

As an agent, you're well-positioned to spot improvements. Found a bug or have an idea? Email the maintainer: Elias Oenal termcli@eliasoenal.com