Gke Ai Troubleshooting Tpu Dynamic Slices Monitoring

GKE TPU Dynamic Slices Monitoring & Management

Monitors the status of TPU Slice custom resources, troubleshoots provisioning failures, validates workload manifests on dynamic slices, and performs cleanups.

Prerequisites

• Cloud Logging enabled for the project.
• kubectl and gcloud CLIs configured to access the GKE cluster.

Diagnostic Workflow

Step 0: Context Acquisition & Time Window Definition

Gather project, cluster, and slice context using cluster tools or the following parameters:

• Project ID: {project_id} (e.g., my-gcp-project)
• Cluster Name: {cluster_name} (e.g., tpu-cluster)
• Region/Zone: {location} (e.g., us-central1-a)
• Slice Name: {slice_name} (e.g., test-slice)
• Issue Time: {timestamp} (Optional; default to the last 30 minutes window [T - 30m] to [T + 30m])

Step 1: Describe the Slice Custom Resource [Low Risk]

When asked to inspect, troubleshoot, or check a slice status, immediately execute kubectl describe slice {slice_name} using available cluster tools to perform the inspection. Parse the resulting Status.Conditions output against the condition table below to diagnose the exact state and provide concrete recommendations.

• Command:

  bashCopy code
  kubectl describe slice {slice_name}
  

State & Reason Analysis

Analyze the Status.Conditions (especially Type: Ready and its Reason and Status):

Provisioning Failure Troubleshooting Checklist

When investigating slice creation or provisioning failures (SliceCreationFailed or FAILED), perform the following verification steps:

1. Node Existence & Allocation Check: Verify that the selected TPU nodes exist in the cluster and are not already allocated to another slice (kubectl get nodes -l cloud.google.com/gke-tpu-slice, kubectl get slice -A).
2. Topology Alignment: Confirm that the partition count matches the requested topology dimensions (e.g. topology 2x2 requires 4 nodes).
3. Reservation Block Alignment Check: Confirm that all selected TPU nodes belong to the same reservation and reservation block.

Step 2: Verify Workload Specification [Low Risk]

Ensure workload manifests are configured correctly to target the dynamic slice.

1. Single-Slice Workload Requirements

Check that the Pod template contains the following annotations and selectors:

• Annotations:
  • cloud.google.com/gke-tpu-slice-topology: "{topology}" (e.g., "4x4x4")
• NodeSelector:
  • cloud.google.com/gke-tpu-topology: "{topology}" (e.g., "4x4x4")
  • cloud.google.com/gke-tpu-accelerator: "{accelerator_type}" (e.g., "tpu7x")
  • cloud.google.com/gke-tpu-slice: "{slice_name}" (e.g., "test-slice")

2. Multi-Slice (JobSet) Workload Requirements

If deploying a multi-slice JobSet, verify:

• JobSet Annotation:
  • alpha.jobset.sigs.k8s.io/exclusive-topology: cloud.google.com/gke-tpu-slice
• Pod Template Annotations:
  • cloud.google.com/gke-tpu-slice-topology: "{topology}"
• Pod Template NodeSelector:
  • cloud.google.com/gke-tpu-topology: "{topology}"
  • cloud.google.com/gke-tpu-accelerator: "{accelerator_type}"
  • Note: Do NOT manually specify cloud.google.com/gke-tpu-slice in the nodeSelector; JobSet handles slice assignment automatically.

Resolution & Management Workflow

Resolution 1: Force Delete a Stuck Slice [High Risk]

If a slice is stuck in DEACTIVATING or deletion hangs indefinitely due to stuck finalizers:

1. Identify Cause: Explain that finalizers on the slice resource (metadata.finalizers) are preventing Kubernetes from completing resource deletion.

2. Propose Resolution: Propose removing finalizers from the metadata path (/metadata/finalizers) using a JSON patch operation:

   bashCopy code
   kubectl patch slice {slice_name} --type json -p='[{"op": "remove", "path": "/metadata/finalizers"}]'
   

3. Provide Warning: Explicitly warn the user that removing finalizers bypasses standard controller dismantling and may leave underlying VM, network, or accelerator resources uncleaned or orphaned.

4. CRITICAL SAFETY MANDATE: The response MUST explicitly ask the user for confirmation (e.g. "Removing finalizers on /metadata/finalizers via JSON patch is a high-risk operation that may leave orphaned resources. Do you confirm you want to apply this patch to slice {slice_name}?") and pause for user confirmation before applying or executing the patch.

Resolution 2: Disable and Clean Up Slice Controller [High Risk]

If dynamic slicing needs to be disabled:

1. Check for existing Slices:

   bashCopy code
   kubectl get slice -A
   

   Ensure all slices are deleted before disabling the controller.

2. Disable Slice Controller via gcloud:

   bashCopy code
   gcloud container clusters update {cluster_name} \
       --location={location} \
       --no-enable-slice-controller
   

3. Delete the Slice CRD:

   bashCopy code
   kubectl delete crd slices.accelerator.gke.io
   

4. Clean up Node Labels: Remove GKE TPU Slice labels from all nodes in the cluster:

   bashCopy code
   kubectl label nodes --all cloud.google.com/gke-tpu-slice- cloud.google.com/gke-tpu-slice-topology-
   

• Safety Rule: Propose the exact commands and confirm before executing disabling or destructive cleanup steps.