Yida Page Config by openyida — AI Skill for Any LLM

Overview

Publisher	openyida
Repository	`openyida`
Skill name	`yida-page-config`
Stars	228
Forks	50
Bundled files	Instructions only
License	MIT
Links	Skill source Repository Homepage

Markdown instructions

A SKILL.md file the model loads on demand, so it only costs tokens when a request actually matches.

Works with any LLM

AI skills are plain Markdown, not provider-specific code, so this works with GPT, Claude, Gemini, Grok, or a local model.

Self-contained

Everything the model needs lives in the instructions — no extra files to sync.

Open source

Published by openyida on GitHub. Read the source before you install it.

Installation

Install the Yida Page Config AI skill in TypingMind to use it with any LLM, or drop it into another agent that reads SKILL.md.

Install in TypingMind

TypingMind installs a skill straight from its GitHub folder — it reads SKILL.md, bundles the resource files, and stores the result locally.

Open the app and go to Plugins → Skills.
Choose "Install from GitHub".
Paste the skill folder URL below and confirm.
https://github.com/openyida/openyida/tree/main/yida-skills/skills/yida-page-config
Enable the skill in any chat where you want it available.

Plugins → Skills → Add skill → From GitHub URL, then paste the folder URL and press Continue.

Install in another agent

Any agent that reads the Agent Skills format can use this skill — copy the folder into that agent's skills directory.

Claude Code — .claude/skills

git clone --depth 1 https://github.com/openyida/openyida.git /tmp/openyida
mkdir -p .claude/skills
cp -r /tmp/openyida/yida-skills/skills/yida-page-config .claude/skills/yida-page-config

Restart Claude Code after copying so it picks up the new skill.

Use it in TypingMind

Enable Yida Page Config in any TypingMind chat and the model takes it from there. Its name and description sit in the system prompt, and the moment a request matches, the model loads the full instructions itself — you never invoke it by hand, and it costs no tokens until it is actually used.

The model loads Yida Page Config on its own as soon as a request matches it.

Works with any AI model

AI skills are plain Markdown instructions rather than provider-specific code, so Yida Page Config is not tied to the model it was written for. Install it once in TypingMind and use it with GPT-5, Claude, Gemini, Grok, DeepSeek, Mistral, Llama, or a local model you run yourself — all on your own API keys.

Loaded only when it is needed

The system prompt carries just the name and description. The instructions are fetched on the first matching request, so an idle skill costs nothing.

Switch models mid-chat

Because the skill is instructions rather than code, changing model does not break it — the next model reads the same SKILL.md.

Skill instructions

This is the SKILL.md content the model loads. Read it before installing — a skill is instructions your model will follow.

页面访问配置

适用范围

用户要求查询或修改已有普通 OpenYida 页面的公开短链 /o/、组织内分享短链 /s/，或明确要求隐藏页面级导航时使用本技能。

先通过创建结果、查询结果或项目配置确认目标页面的 appType 和 formUuid。页面归属不清、信息过期或结果冲突时，先查清再修改；不能只凭标题或猜测的链接确定页面。

能力边界

配置	已确认语义	当前 CLI 能力边界
`/o/<path>`	公开访问短链，保存字段为 openUrl，并由 isOpen 控制开关	openAuth 为三态：省略时保留完整 `openPageAuthConfig`，显式 y/n 时只 patch `openAuth`；CLI 不改写 authType/authSources 等授权来源
`/s/<path>`	组织内分享短链，保存字段为 shareUrl	isOpen 和 openAuth 不定义 `/s/` 的访问能力；以平台查询结果和实际访问验证为准

页面使用哪类数据、是否允许公开、openAuth 对当前页面和组织开放哪些资格，必须来自平台能力、用户确认或实际查询证据。本技能不根据页面类型或数据源猜测资格。

匿名（免登）提交前置条件

当用户要求"自定义页面在公开访问下提交数据到表单"或"走免登提交接口"时，作为前置门禁：

显示页和目标表单都需要 isOpen：分别运行 openyida get-page-config <appType> <显示页formUuid> 和 openyida get-page-config <appType> <目标formUuid>，两者都返回 isOpen === 'y' 才承诺匿名提交。缺任一时先启用公开访问或改回登录态方案。
目标表单权限需包含 FREE_LOGIN：运行 openyida get-permission <appType> <目标formUuid>，DEFAULT 权限组的 dataPermit.rule 须包含 {"type":"FREE_LOGIN","value":"y"}。缺少时按 yida-form-permission 锁定 DEFAULT 组 packageUuid，在完整现有 dataPermit 中只补该规则并保留其他规则，禁止用固定模板覆盖现网权限。
页面运行时分流是匿名态决定的，不是"表单公开"决定的：具体分流写法和 RECEIPT_SAVE_FORM_DATA 网关契约见 yida-canvas-custom-page/references/data-bridge-guide.md 的"公开访问（匿名态）提交"章节。
匿名提交的能力边界（不能发起流程、唯一性校验不生效、成员/部门/关联字段不支持、提交人恒为匿名、附件默认不跨组织）由平台限制决定；需要这些能力时改用登录态页面 + 关闭公开访问。

铁律

目标必须可证明：appType 和 formUuid 从创建/查询命令或当前项目 config.json 获取；证据冲突时停止。
一类短链修改必须保留另一类：修改 /o/ 时保留已有 /s/，并完整保留非目标授权字段；修改 /s/ 时保留已有 /o/、isOpen 和公开授权配置。当前 openPageAuthConfig 缺失或不可解析时 fail-closed。
短链必须先验证：启用或替换短链前运行 verify-short-url；验证失败时零写入。
写后必须重查：保存成功只表示请求成功；get-page-config 的实际 URL 与预期一致后才报告完成。
平台状态是真相源：本技能不使用 memory 保存页面配置。

标准流程

查询：运行 openyida get-page-config <appType> <formUuid>，记录 openUrl、shareUrl 和 isOpen。
差异预览：输出 before/after，明确目标短链的变化以及另一类短链保持值。
确认：用户确认 URL、/o/ 或 /s/ 语义；使用 /o/ 时确认 isOpen，并仅在明确要改变授权开关时传 openAuth。省略 openAuth 表示保持，不再默认为 n。
写入：先验证目标 URL，再执行一次 save-share-config。CLI 会再次查询当前配置并合并未修改字段。
重查验证：CLI 保存后会重查并返回 before/after；Agent 再以 get-page-config 和实际访问结果验证目标 URL。expected/actual 不一致时停止。

命令

查询：

bash
openyida get-page-config <appType> <formUuid>

验证目标短链：

bash
openyida verify-short-url <appType> <formUuid> </o/path|/s/path>

保存：

bash
openyida save-share-config <appType> <formUuid> <url> <isOpen> [openAuth]

参数	规则
`url`	`/o/...` 修改 openUrl；`/s/...` 修改 shareUrl
`isOpen`	`y` 或 `n`；控制 `/o/` 公开开关
`openAuth`	可省略、`y` 或 `n`；省略=完整保留，显式 y/n=只修改 openAuth，不声明授权资格或人员范围

路径段支持 a-z A-Z 0-9 _ -，可用单个 / 分隔。空路径段、连续 / 和尾部 / 校验失败。URL 是否可用由 verify-short-url 接口结果决定。

页面级导航

用户明确要求页面隐藏导航、无导航或全屏无框，或者 yida-app 的 PRD 已把主页面明确标记为 entryMode=standalone 时执行。已确定为前台入口的自定义页面默认需要同样的持久化配置；遗漏 entryMode 时按业务用途补齐，不要求用户额外传开关；用户明确保留平台导航时沿用 platform-shell，不执行隐藏：

bash
openyida update-form-config <appType> <formUuid> false "<页面标题>"

这条命令使用写入接口的 isRenderNav=false，回读检查 renderNav；URL 上同名参数只作用于本次打开，三者不冲突，见字段口径。只有整个应用采用自定义导航时，才使用 openyida update-app <appType> --hide-app-nav 隐藏应用导航；独立访客端自定义菜单与管理端平台导航共存时，保留 hideAppNav=n。页面内是否显示导航、平台菜单是否包含该页、实际访问权限分别配置。详见访问态入口契约。

完整应用的独立入口必须在写入后再执行 openyida get-form-config <appType> <formUuid> --json。只有回读确认 renderNav=false 后，才输出 CLI 返回的 standaloneUrl，即不带导航查询参数的 /custom/{formUuid}；仅缺少 renderNav 时兼容 isRenderNav，布尔值和字符串 "false" 均可，缺失或无效值不算成功。失败时可以保留工作台作为排查地址，但必须标记前台入口未完成，不用 /workbench 替代独立前台交付，不把 URL 参数当作持久配置成功证据。

创建 dashboard 页面时，只有用户明确要求隐藏页面导航才使用：

bash
openyida create-page <appType> "<页面名>" --mode dashboard --hide-nav

失败处理

结果	动作
URL 格式或可用性验证失败	零写入；展示接口错误并让用户选择新路径
保存前查询失败	零写入；处理登录态、权限或资源身份问题
当前 `/o/` 授权配置缺失或不可解析	零写入；保留查询结果并让用户在平台确认当前公开配置
保存请求失败	停止；保留 before，不自动重复提交
写后重查不一致	报告 expected/actual 和 before/after，不宣称完成
实际 URL 无法访问	记录状态码和页面响应；不猜测 CDN、公开资格或 openAuth 语义
网络超时	先重查配置；无法证明是否写入时停止并交给用户判断

明确不支持

页面人员/部门白名单、公开访问资格探测、openAuth 授权主体配置和 permission-v2。

Frequently asked questions

What does the Yida Page Config AI skill do?

为已有页面设置公开访问、组织内分享，或隐藏该页的平台导航时使用。隐藏导航不会改变访问权限。

Why use Yida Page Config on TypingMind?

Because you install it once and use it with any model. Yida Page Config is plain Markdown rather than provider-specific code, so the same skill runs on GPT-5, Claude, Gemini, Grok, or a local model — and you can switch model mid-chat without it breaking. TypingMind runs on your own API keys, so you pay providers directly instead of a per-seat subscription, and your skills and chats stay in your own storage.

How do I install Yida Page Config in TypingMind?

Open Plugins → Skills → Install from GitHub in TypingMind and paste https://github.com/openyida/openyida/tree/main/yida-skills/skills/yida-page-config. TypingMind reads its SKILL.md and installs it as a skill you can enable per chat.

Which AI models can use Yida Page Config?

Any model you connect in TypingMind. AI skills are plain Markdown instructions rather than provider-specific code, so GPT, Claude, Gemini, Grok, and local models can all load this skill when a request matches it.

How many AI models can I use with Yida Page Config?

As many as you like. As long as a model supports skills, you can use Yida Page Config with it — GPT, Claude, Gemini, Grok, DeepSeek, Mistral, Llama and more — all on TypingMind with your own API keys.

Is the Yida Page Config AI skill free?

Yes. It is published on GitHub by openyida under the MIT license. You only pay your own AI provider for the tokens you use.

What are AI skills?

An AI skill is a reusable instruction bundle that teaches an AI model how to do one specific task. It follows the open Agent Skills format: a SKILL.md file with a name and description, plus any scripts, templates or reference files the model may need. The model reads the instructions only when your request matches the skill, so an installed skill costs nothing until it is used.

How are AI skills different from plugins or MCP servers?

A plugin or MCP server gives a model new tools to call — code that runs somewhere and returns a result. An AI skill gives the model knowledge and process instead: how to approach a task, which steps to follow, what good output looks like. Skills are plain Markdown, so they need no server, no API key and no runtime, and they work with any model.

Overview

Installation

Install in TypingMind

Install in another agent

Use it in TypingMind

Works with any AI model

Skill instructions

页面访问配置

适用范围

能力边界

匿名（免登）提交前置条件

铁律

标准流程

命令

页面级导航

失败处理

明确不支持

Frequently asked questions

Related AI Skills

Set up your own AI workspace now