Orchestrate

orchestrate — the whole pipeline, end to end

orchestrate is the autonomous driver: it runs every phase in order and enforces the guardrails so a full optimization run needs little supervision. It does not add new logic — it sequences the phase skills and refuses to let the run skip a safety check. Its value is that the honesty discipline (ask-if-missing, hard gate, val-only acceptance, sealed test) is applied automatically rather than relying on the operator to remember each one.

Inputs / outputs (manifest tokens)

• needs: project — resolved from capevolve.yaml (which capability / optimizer / algorithm / budget).
• provides: report — the end-to-end result: baseline → best val → sealed test, with the winner named.

The sequence (and the guardrail at each step)

1. intake — collect inputs, scaffold the project, ask for any missing NEEDED input (never fabricate one).
2. implement-and-check — implement the adapter; cap-evolve check must be green (HARD GATE — do not advance until {"ok": true}).
3. baseline — freeze the split (once, seeded), score the seed on val, check headroom (stop early if the seed already saturates val).
4. <algorithm> — run the loop named in capevolve.yaml (default all-at-once): propose → evaluate(val) → diagnose → gate → accept/reject, until budget/stall. Acceptance is always on val, by significance (Δ > k·SE).
5. finalize — score the best candidate on the sealed test split, once.
6. report — baseline vs test; name the winner; surface pass^k and uncertainty.

The wiring is validated structurally: each step's needs must be satisfied by an upstream provides in the manifest, so a misordered or incompatible pipeline is caught before it runs.

Agent-mode loop (orchestration_mode: agent)

When the spec sets orchestration_mode: agent, cap-evolve does intake → check → baseline, then hands YOU the loop (it prints a handoff with the run_dir). YOU — the coding agent in this conversation — run the optimization yourself: read the selected algorithm's "Agent-mode loop" section (skills/algorithms/<algorithm_skill>/SKILL.md), make the capability edits, and run the evaluations directly. You do not delegate the search to a separate optimizer agent — that per-iteration "optimizer" edit-proposer is a deterministic-mode concept; in agent mode you are the optimizer. (You may still spawn helper subagents for parallel sub-tasks if an algorithm's loop calls for it, but the driver is you.)

One continuous agent, with the user in the loop. The agent that ran the intake/onboarding is the same agent that drives the optimization — one continuous conversation, not a fresh agent spawned by the CLI. cap-evolve run does not start a new agent; it only does the baseline plumbing and hands the loop back to you. Stay reachable the whole time: the user can interject, steer, re-prioritize, or halt at any round (governance throughout), and you fold their input into the next round. Ask setup questions up front (in intake) so the loop can run without blocking on a human — but never treat the run as a fire-and-forget subprocess; it is you, continuing.

Rules:

1. Drive through cap-evolve primitives, never around them. Every evaluation goes through cap-evolve's eval (so per-rollout JSON + results land in the run dir); every accept/reject goes through the gate on val (Δ > k·SE); every accepted candidate is snapshotted via the store; log round boundaries with the run dir's event log. This is what keeps events.jsonl/rollouts/results/snapshots populated so the dashboard renders with no changes.
2. Honesty is self-policed: never touch the sealed test split until the end; revert on regression; acceptance is val-only.
3. Between rounds, verify the run dir has what the dashboard needs before continuing: the round's events are logged, results/rollouts are written, and each accepted candidate is snapshotted. If a round produced no run-dir artifacts, the dashboard will be blank — fix that before proceeding.
4. Re-read stop_condition each round. Stop when it is met, or budget/stall hits.
5. Seal once, at the end: run the finalize phase script skills/phases/finalize/scripts/run.py (scores the best candidate on the sealed test split exactly once), then the report phase script skills/phases/report/scripts/run.py — see docs/AGENT_ORCHESTRATION.md for the exact invocations. Neither is a cap-evolve subcommand; both are scripts. A run with no finalize has no result.

How to run

Copy code
python scripts/run.py --spec .capevolve/project/capevolve.yaml            # print the plan
python scripts/run.py --spec .capevolve/project/capevolve.yaml --execute  # run it (cap-evolve run)

Without --execute it prints the ordered plan (sequence, components, gate mode, budget) for inspection — run this first to confirm the pipeline before spending anything. Or, host-agnostic, follow RUN.md step by step; or cap-evolve run --spec.

Stopping rules

Stop when any holds:

• budget exhausted — max_iterations, max_metric_calls, or max_usd hit.
• stall — N consecutive rejects (the search has plateaued; more tries just burn budget chasing noise the gate will keep rejecting).
• no headroom — the baseline already saturates val.

Whatever the stop reason, always finish with finalize + report so the honest, sealed-test number is recorded. An optimization run with no finalize has no result.

What good vs bad looks like

• Good: the plan inspected before --execute; every guardrail enforced automatically; the run ends with a sealed-test number and a named winner, even when the answer is "no significant gain".
• Bad: advancing past a red cap-evolve check; gating on train; finalizing more than one candidate; declaring success on val without ever scoring test.

References

• references/concepts.md — the phase sequence as a needs/provides DAG, where each honesty guardrail lives, and the stop rules, with sources.