Telnyx Numbers Services Curl

Telnyx Numbers Services - curl

Installation

textCopy code
# curl is pre-installed on macOS, Linux, and Windows 10+

Setup

bashCopy code
export TELNYX_API_KEY="YOUR_API_KEY_HERE"

All examples below use $TELNYX_API_KEY for authentication.

Error Handling

All API calls can fail with network errors, rate limits (429), validation errors (422), or authentication errors (401). Always handle errors in production code:

bashCopy code
# Check HTTP status code in response
response=$(curl -s -w "\n%{http_code}" \
  -X POST "https://api.telnyx.com/v2/messages" \
  -H "Authorization: Bearer $TELNYX_API_KEY" \
  -H "Content-Type: application/json" \
  -d '{"to": "+13125550001", "from": "+13125550002", "text": "Hello"}')

http_code=$(echo "$response" | tail -1)
body=$(echo "$response" | sed '$d')

case $http_code in
  2*) echo "Success: $body" ;;
  422) echo "Validation error — check required fields and formats" ;;
  429) echo "Rate limited — retry after delay"; sleep 1 ;;
  401) echo "Authentication failed — check TELNYX_API_KEY" ;;
  *)   echo "Error $http_code: $body" ;;
esac

Common error codes: 401 invalid API key, 403 insufficient permissions, 404 resource not found, 422 validation error (check field formats), 429 rate limited (retry with exponential backoff).

Important Notes

• Pagination: List endpoints return paginated results. Use page[number] and page[size] query parameters to navigate pages. Check meta.total_pages in the response.

List your voice channels for non-US zones

Returns the non-US voice channels for your account. voice channels allow you to use Channel Billing for calls to your Telnyx phone numbers. Please check the Telnyx Support Articles section for full information and examples of how to utilize Channel Billing.

GET /channel_zones

bashCopy code
curl -H "Authorization: Bearer $TELNYX_API_KEY" "https://api.telnyx.com/v2/channel_zones"

Returns: channels (int64), countries (array[string]), created_at (string), id (string), name (string), record_type (enum: channel_zone), updated_at (string)

Update voice channels for non-US Zones

Update the number of Voice Channels for the Non-US Zones. This allows your account to handle multiple simultaneous inbound calls to Non-US numbers. Use this endpoint to increase or decrease your capacity based on expected call volume.

PUT /channel_zones/{channel_zone_id} — Required: channels

bashCopy code
curl \
  -X PUT \
  -H "Authorization: Bearer $TELNYX_API_KEY" \
  -H "Content-Type: application/json" \
  -d '{
  "channels": 0
}' \
  "https://api.telnyx.com/v2/channel_zones/{channel_zone_id}"

Returns: channels (int64), countries (array[string]), created_at (string), id (string), name (string), record_type (enum: channel_zone), updated_at (string)

List dynamic emergency addresses

Returns the dynamic emergency addresses according to filters

GET /dynamic_emergency_addresses

bashCopy code
curl -H "Authorization: Bearer $TELNYX_API_KEY" "https://api.telnyx.com/v2/dynamic_emergency_addresses"

Returns: administrative_area (string), country_code (enum: US, CA, PR), created_at (string), extended_address (string), house_number (string), house_suffix (string), id (string), locality (string), postal_code (string), record_type (string), sip_geolocation_id (string), status (enum: pending, activated, rejected), street_name (string), street_post_directional (string), street_pre_directional (string), street_suffix (string), updated_at (string)

Create a dynamic emergency address.

Creates a dynamic emergency address.

POST /dynamic_emergency_addresses — Required: house_number, street_name, locality, administrative_area, postal_code, country_code

Optional: created_at (string), extended_address (string), house_suffix (string), id (string), record_type (string), sip_geolocation_id (string), status (enum: pending, activated, rejected), street_post_directional (string), street_pre_directional (string), street_suffix (string), updated_at (string)

bashCopy code
curl \
  -X POST \
  -H "Authorization: Bearer $TELNYX_API_KEY" \
  -H "Content-Type: application/json" \
  -d '{
  "house_number": "600",
  "street_name": "Congress",
  "locality": "Austin",
  "administrative_area": "TX",
  "postal_code": "78701",
  "country_code": "US"
}' \
  "https://api.telnyx.com/v2/dynamic_emergency_addresses"

Returns: administrative_area (string), country_code (enum: US, CA, PR), created_at (string), extended_address (string), house_number (string), house_suffix (string), id (string), locality (string), postal_code (string), record_type (string), sip_geolocation_id (string), status (enum: pending, activated, rejected), street_name (string), street_post_directional (string), street_pre_directional (string), street_suffix (string), updated_at (string)

Get a dynamic emergency address

Returns the dynamic emergency address based on the ID provided

GET /dynamic_emergency_addresses/{id}

bashCopy code
curl -H "Authorization: Bearer $TELNYX_API_KEY" "https://api.telnyx.com/v2/dynamic_emergency_addresses/550e8400-e29b-41d4-a716-446655440000"

Returns: administrative_area (string), country_code (enum: US, CA, PR), created_at (string), extended_address (string), house_number (string), house_suffix (string), id (string), locality (string), postal_code (string), record_type (string), sip_geolocation_id (string), status (enum: pending, activated, rejected), street_name (string), street_post_directional (string), street_pre_directional (string), street_suffix (string), updated_at (string)

Delete a dynamic emergency address

Deletes the dynamic emergency address based on the ID provided

DELETE /dynamic_emergency_addresses/{id}

bashCopy code
curl \
  -X DELETE \
  -H "Authorization: Bearer $TELNYX_API_KEY" \
  "https://api.telnyx.com/v2/dynamic_emergency_addresses/550e8400-e29b-41d4-a716-446655440000"

Returns: administrative_area (string), country_code (enum: US, CA, PR), created_at (string), extended_address (string), house_number (string), house_suffix (string), id (string), locality (string), postal_code (string), record_type (string), sip_geolocation_id (string), status (enum: pending, activated, rejected), street_name (string), street_post_directional (string), street_pre_directional (string), street_suffix (string), updated_at (string)

List dynamic emergency endpoints

Returns the dynamic emergency endpoints according to filters

GET /dynamic_emergency_endpoints

bashCopy code
curl -H "Authorization: Bearer $TELNYX_API_KEY" "https://api.telnyx.com/v2/dynamic_emergency_endpoints"

Returns: callback_number (string), caller_name (string), created_at (string), dynamic_emergency_address_id (string), id (string), record_type (string), sip_from_id (string), status (enum: pending, activated, rejected), updated_at (string)

Create a dynamic emergency endpoint.

Creates a dynamic emergency endpoints.

POST /dynamic_emergency_endpoints — Required: dynamic_emergency_address_id, callback_number, caller_name

Optional: created_at (string), id (string), record_type (string), sip_from_id (string), status (enum: pending, activated, rejected), updated_at (string)

bashCopy code
curl \
  -X POST \
  -H "Authorization: Bearer $TELNYX_API_KEY" \
  -H "Content-Type: application/json" \
  -d '{
  "dynamic_emergency_address_id": "0ccc7b54-4df3-4bca-a65a-3da1ecc777f0",
  "callback_number": "+13125550000",
  "caller_name": "Jane Doe Desk Phone"
}' \
  "https://api.telnyx.com/v2/dynamic_emergency_endpoints"

Returns: callback_number (string), caller_name (string), created_at (string), dynamic_emergency_address_id (string), id (string), record_type (string), sip_from_id (string), status (enum: pending, activated, rejected), updated_at (string)

Get a dynamic emergency endpoint

Returns the dynamic emergency endpoint based on the ID provided

GET /dynamic_emergency_endpoints/{id}

bashCopy code
curl -H "Authorization: Bearer $TELNYX_API_KEY" "https://api.telnyx.com/v2/dynamic_emergency_endpoints/550e8400-e29b-41d4-a716-446655440000"

Returns: callback_number (string), caller_name (string), created_at (string), dynamic_emergency_address_id (string), id (string), record_type (string), sip_from_id (string), status (enum: pending, activated, rejected), updated_at (string)

Delete a dynamic emergency endpoint

Deletes the dynamic emergency endpoint based on the ID provided

DELETE /dynamic_emergency_endpoints/{id}

bashCopy code
curl \
  -X DELETE \
  -H "Authorization: Bearer $TELNYX_API_KEY" \
  "https://api.telnyx.com/v2/dynamic_emergency_endpoints/550e8400-e29b-41d4-a716-446655440000"

Returns: callback_number (string), caller_name (string), created_at (string), dynamic_emergency_address_id (string), id (string), record_type (string), sip_from_id (string), status (enum: pending, activated, rejected), updated_at (string)

List your voice channels for US Zone

Returns the US Zone voice channels for your account. voice channels allows you to use Channel Billing for calls to your Telnyx phone numbers. Please check the Telnyx Support Articles section for full information and examples of how to utilize Channel Billing.

GET /inbound_channels

bashCopy code
curl -H "Authorization: Bearer $TELNYX_API_KEY" "https://api.telnyx.com/v2/inbound_channels"

Returns: channels (integer), record_type (string)

Update voice channels for US Zone

Update the number of Voice Channels for the US Zone. This allows your account to handle multiple simultaneous inbound calls to US numbers. Use this endpoint to increase or decrease your capacity based on expected call volume.

PATCH /inbound_channels — Required: channels

bashCopy code
curl \
  -X PATCH \
  -H "Authorization: Bearer $TELNYX_API_KEY" \
  -H "Content-Type: application/json" \
  -d '{
  "channels": 7
}' \
  "https://api.telnyx.com/v2/inbound_channels"

Returns: channels (integer), record_type (string)

List All Numbers using Channel Billing

Retrieve a list of all phone numbers using Channel Billing, grouped by Zone.

GET /list

bashCopy code
curl -H "Authorization: Bearer $TELNYX_API_KEY" "https://api.telnyx.com/v2/list"

Returns: number_of_channels (integer), numbers (array[object]), zone_id (string), zone_name (string)

List Numbers using Channel Billing for a specific Zone

Retrieve a list of phone numbers using Channel Billing for a specific Zone.

GET /list/{channel_zone_id}

bashCopy code
curl -H "Authorization: Bearer $TELNYX_API_KEY" "https://api.telnyx.com/v2/list/{channel_zone_id}"

Returns: number_of_channels (integer), numbers (array[object]), zone_id (string), zone_name (string)

Get voicemail

Returns the voicemail settings for a phone number

GET /phone_numbers/{phone_number_id}/voicemail

bashCopy code
curl -H "Authorization: Bearer $TELNYX_API_KEY" "https://api.telnyx.com/v2/phone_numbers/{phone_number_id}/voicemail"

Returns: enabled (boolean), pin (string)

Create voicemail

Create voicemail settings for a phone number

POST /phone_numbers/{phone_number_id}/voicemail

Optional: enabled (boolean), pin (string)

bashCopy code
curl \
  -X POST \
  -H "Authorization: Bearer $TELNYX_API_KEY" \
  -H "Content-Type: application/json" \
  "https://api.telnyx.com/v2/phone_numbers/{phone_number_id}/voicemail"

Returns: enabled (boolean), pin (string)

Update voicemail

Update voicemail settings for a phone number

PATCH /phone_numbers/{phone_number_id}/voicemail

Optional: enabled (boolean), pin (string)

bashCopy code
curl \
  -X PATCH \
  -H "Authorization: Bearer $TELNYX_API_KEY" \
  -H "Content-Type: application/json" \
  "https://api.telnyx.com/v2/phone_numbers/{phone_number_id}/voicemail"

Returns: enabled (boolean), pin (string)