TypingMindTypingMindThe best frontend for AI
Solidworks Engineering Drawing logo

Solidworks Engineering Drawing

CommunityPopular
wzyn20051216
solidworks-engineering-drawing

SolidWorks 工程图生成与制造交付审视子技能，支持 GB/T 第一角零件图、装配图、尺寸链、孔表、BOM、PDF/BMP 证据和钣金能力门禁。

Overview

Publisherwzyn20051216
Repositorysolidworks-automation-skill
Skill namesolidworks-engineering-drawing
Stars
1.1K
Forks
99
Bundled files
9
LicenseMIT
Links
Skill sourceRepository
  • Markdown instructions

    A SKILL.md file the model loads on demand, so it only costs tokens when a request actually matches.

  • Works with any LLM

    AI skills are plain Markdown, not provider-specific code, so this works with GPT, Claude, Gemini, Grok, or a local model.

  • 9 bundled files

    Scripts, templates, and references the model can read while it works. Files are read-only and never executed.

  • Open source

    Published by wzyn20051216 on GitHub. Read the source before you install it.

Installation

Install the Solidworks Engineering Drawing AI skill in TypingMind to use it with any LLM, or drop it into another agent that reads SKILL.md.

1

Install in TypingMind

TypingMind installs a skill straight from its GitHub folder — it reads SKILL.md, bundles the resource files, and stores the result locally.

  1. Open the app and go to Plugins → Skills.
  2. Choose "Install from GitHub".
  3. Paste the skill folder URL below and confirm.
    https://github.com/wzyn20051216/solidworks-automation-skill/tree/main/subskills/solidworks-engineering-drawing
  4. Enable the skill in any chat where you want it available.
Plugins → Skills → Add skill → From GitHub URL, then paste the folder URL and press Continue.
2

Install in another agent

Any agent that reads the Agent Skills format can use this skill — copy the folder into that agent's skills directory.

Claude Code — .claude/skills
git clone --depth 1 https://github.com/wzyn20051216/solidworks-automation-skill.git /tmp/solidworks-automation-skill
mkdir -p .claude/skills
cp -r /tmp/solidworks-automation-skill/subskills/solidworks-engineering-drawing .claude/skills/solidworks-engineering-drawing
Restart Claude Code after copying so it picks up the new skill.

Use it in TypingMind

Enable Solidworks Engineering Drawing in any TypingMind chat and the model takes it from there. Its name and description sit in the system prompt, and the moment a request matches, the model loads the full instructions itself — you never invoke it by hand, and it costs no tokens until it is actually used.

The model loads Solidworks Engineering Drawing on its own as soon as a request matches it.

Works with any AI model

AI skills are plain Markdown instructions rather than provider-specific code, so Solidworks Engineering Drawing is not tied to the model it was written for. Install it once in TypingMind and use it with GPT-5, Claude, Gemini, Grok, DeepSeek, Mistral, Llama, or a local model you run yourself — all on your own API keys.

  • Loaded only when it is needed

    The system prompt carries just the name and description. The instructions are fetched on the first matching request, so an idle skill costs nothing.

  • Switch models mid-chat

    Because the skill is instructions rather than code, changing model does not break it — the next model reads the same SKILL.md.

Skill instructions

This is the SKILL.md content the model loads. Read it before installing — a skill is instructions your model will follow.

SolidWorks 工程图生成与审视

本子技能专注二维工程图。它依赖根技能 solidworks-automation 提供 SolidWorks COM 会话、模型、导出和通用几何证据；自身负责 DrawingSpec v1、工程图工作流和制造交付审视。

何时调用

  • 生成零件工程图或装配工程图。
  • 需要 GB/T 图框、第一角投影、尺寸链、孔表、BOM 或标题栏。
  • 检查工程图视图重叠、尺寸文字、PDF 文字、标题栏侵入或交付证据。
  • 钣金任务需要审视展开图证据时。

默认规则

  • standard=GB_T 默认使用 projection=first_angle。
  • GB/T + 第三角投影会被 DrawingSpec 前置检查阻断。
  • 所有孔、槽和接口必须有规格、数量和定位信息。
  • 工程图交付必须导出 PDF，并将每个 COM 尺寸位置与最终 PDF 的矢量文字框一一关联；PDF 缺失、解析器缺失、关联不完整或文字碰撞都会阻断或要求复核。
  • 本子技能不实现强化学习，也不暴露任意 Python/VBA 执行入口。

工作流

  1. 读取并校验 schemas/drawing_spec.schema.json。
  2. 运行根技能的 SolidWorks preflight 和能力探测。
  3. 选择图框，创建图纸页，回读图幅和投影法。
  4. 按执行器能力创建视图、尺寸、孔表和 BOM，并回读真实实体；不得静默忽略 DrawingSpec 字段。
  5. 保存 .slddrw，导出 PDF 和 BMP/PNG。
  6. 运行 drawing_review.py，生成机器证据和人工复核门禁。

能力边界

  • 零件和装配工程图为 pilot：跨版本真机回归仍在持续；但在 PDF 尺寸文字框、视图边界、尺寸链、孔表和 BOM 证据全部通过时，工具会返回 pass，不会因 COM 缺少原生文字框而无条件降级。
  • 通用 MCP 生成器当前只可靠执行空配置的 front/top/right 三视图、显式且可容纳的比例、模型尺寸导入、注释和模板化 BOM。轴测、剖视、局部视图、指定 ID 尺寸、孔标注/孔表、标题栏业务字段和钣金专用选项必须在修改文档前返回 DRAWING_SPEC_CAPABILITY_UNSUPPORTED，由专项脚本执行。
  • 审查器按尺寸 ID/视图/种类/数值、孔规格/数量/位置、真实 BOM 类型/数据行/配置及标题栏字段回读做结构化核验；模板候选、任意表格或模糊子串不能作为通过证据。
  • professionalAnnotations 可声明中心标记、中心线、孔标注、基准、GD&T、表面粗糙度和焊接符号。审查器只接受 SolidWorks 专用实体回读；普通 Note 文字不能替代。
  • 通用生成器已支持 centerMarks 自动写入：每项必须声明 id、标准视图、期望总数和 targets（holes/fillets/slots），并通过 GetFirstCenterMark2/GetNext 实体回读。SW2026 真机确认新建工程图需首次保存后再插入；未保存状态下 API 可能返回 True 但实体暂不可回读，封装会保持失败。其余专业标注仍保持能力阻断。
  • 跨版本真机矩阵使用 python tests/solidworks_drawing_version_matrix.py --years 2024 2025 2026。脚本只启动已注册的精确版本 ProgID，并核对实际回读年份；未安装版本记为 unavailable，不得用默认 ProgID 的结果顶替。
  • 钣金工程图只有在本机存在可靠展开图证据时继续；缺证据返回 blocked，不宣称无人值守完成。
  • 完整 GD&T 语义求解不在本版本范围内，只检查要求是否存在并可追溯。

依赖根技能

优先复用：scripts/sw_connect.py、scripts/sw_session.py、scripts/sw_export.py、 scripts/sw_review.py、scripts/sw_document_data.py 和 scripts/sw_capability_probe.py。

Bundled files

The model reads these on demand while the skill is loaded. They are exposed as readable files and are never executed.

Frequently asked questions

What does the Solidworks Engineering Drawing AI skill do?

SolidWorks 工程图生成与制造交付审视子技能，支持 GB/T 第一角零件图、装配图、尺寸链、孔表、BOM、PDF/BMP 证据和钣金能力门禁。

Why use Solidworks Engineering Drawing on TypingMind?

Because you install it once and use it with any model. Solidworks Engineering Drawing is plain Markdown rather than provider-specific code, so the same skill runs on GPT-5, Claude, Gemini, Grok, or a local model — and you can switch model mid-chat without it breaking. TypingMind runs on your own API keys, so you pay providers directly instead of a per-seat subscription, and your skills and chats stay in your own storage.

How do I install Solidworks Engineering Drawing in TypingMind?

Open Plugins → Skills → Install from GitHub in TypingMind and paste https://github.com/wzyn20051216/solidworks-automation-skill/tree/main/subskills/solidworks-engineering-drawing. TypingMind reads its SKILL.md and bundles its files and installs it as a skill you can enable per chat.

Which AI models can use Solidworks Engineering Drawing?

Any model you connect in TypingMind. AI skills are plain Markdown instructions rather than provider-specific code, so GPT, Claude, Gemini, Grok, and local models can all load this skill when a request matches it.

How many AI models can I use with Solidworks Engineering Drawing?

As many as you like. As long as a model supports skills, you can use Solidworks Engineering Drawing with it — GPT, Claude, Gemini, Grok, DeepSeek, Mistral, Llama and more — all on TypingMind with your own API keys.

Is the Solidworks Engineering Drawing AI skill free?

Yes. It is published on GitHub by wzyn20051216 under the MIT license. You only pay your own AI provider for the tokens you use.

What are AI skills?

An AI skill is a reusable instruction bundle that teaches an AI model how to do one specific task. It follows the open Agent Skills format: a SKILL.md file with a name and description, plus any scripts, templates or reference files the model may need. The model reads the instructions only when your request matches the skill, so an installed skill costs nothing until it is used.

How are AI skills different from plugins or MCP servers?

A plugin or MCP server gives a model new tools to call — code that runs somewhere and returns a result. An AI skill gives the model knowledge and process instead: how to approach a task, which steps to follow, what good output looks like. Skills are plain Markdown, so they need no server, no API key and no runtime, and they work with any model.

Related AI Skills

View all
openclaw logo

Wacli

openclaw
OrganizationPopular

Send third-party WhatsApp messages or sync/search WhatsApp history via wacli, not normal active chats.

82.2K
391K
Instructions
View
openclaw logo

Himalaya

openclaw
OrganizationPopular

Himalaya CLI for IMAP/SMTP mail: list, read, search, compose, reply, forward, copy, move, delete.

82.2K
391K
2 files
View
openclaw logo

Nano Pdf

openclaw
OrganizationPopular

Edit PDFs with natural-language instructions using the nano-pdf CLI.

82.2K
391K
Instructions
View
obra logo

Subagent Driven Development

obra
CommunityPopular

Use when executing implementation plans with independent tasks in the current session

25.8K
288.1K
6 files
View

Set up your own AI workspace now

Get notified about new features and future giveaways by subscribing to our newsletter 👇